Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
16 | Widerstand 270Ω | R5-R20 | Metall | Reichelt: METALL 270 |
4 | Widerstand 820Ω | R1-R4 | Metall | Reichelt: METALL 820 |
1 | Widerstand 1kΩ | R22 | Metall | Reichelt: METALL 1,00K |
2 | Widerstand 18kΩ | R21, R24 | Metall | Reichelt: METALL 18,0K |
1 | Trimmpoti 100kΩ | R23 | Miniatur-Trimmer, liegend | Reichelt: PT 6-L 100K |
2 | Kondensator 22pF | C1, C2 | Keramik | Reichelt: KERKO 22P |
5 | Kondensator 100nF | C3-C6, C8 | Keramik | Reichelt: KERKO 100N |
1 | Kondensator 100µF, 25V | C7 | Elektrolyt, radial | Reichelt: RAD 100/25 |
1 | Kondensator 470µF, 25V | C9 | Elektrolyt, radial, Low-ESR | Reichelt: RAD FR 470/16 |
1 | Induktivität 330µH | L1 | Festinduktivität, 500mA | Reichelt: 09P 330µ |
1 | Quarz 4,0MHz | Q1 | Bauform HC49/U-S | Reichelt: 4,0000-HC49U-S |
8 | LED SA08-11SRWA | D1-D8 | gemeinsame Anode | Reichelt: SA 08-11 RT |
1 | Diode 1N4148 | D9 | | Reichelt: 1N 4148 |
1 | Diode 1N4004 | D10 | | Reichelt: 1N 4004 |
1 | Schottky-Diode 1N5819 | D11 | | Reichelt: 1N 5819 |
4 | Transistor BC327-25 | T1-T4 | | Reichelt: BC 327-25 |
1 | Fototransistor BPW40 | T5 | | Reichelt: BPW 40 |
1 | IC ATmega16 | IC1 | ATmega16-16PC, ATmega16-16PI oder ATmega16-16PU | Reichelt: ATMEGA 16-16 DIP |
1 | IC LM2575-5.0 | IC2 | TO-22 | Reichelt: LM 2575 T5,0 |
1 | IC-Fassung 40-polig | (IC1) | | Reichelt: GS 40P |
1 | Jumper | J1 | trennbare 36-polige Leiste | Reichelt: SL 1X36G 2,54 |
1 | Jumper | J1 | Kurzschlussbrücke | Reichelt: JUMPER 2,54 SW |
1 | Buchsenleiste 4-polig | K1 | trennbare 20-polige Leiste (reicht für K1 und K2) | Reichelt: SPL 20 |
1 | Buchsenleiste 5-polig | K2 | trennbare 20-polige Leiste (reicht für K1 und K2) | Reichelt: SPL 20 |
1 | Taster | S1 | für Printmontage | Reichelt: TASTER 9302 |
1 | Steckernetzgerät 12V/0,2A | | Schaltnetzteil geregelt | Reichelt: SNT 600 12V 2,5 |
1 | Lochraster-Platine | | 118mm x 62mm, Raster 2,54mm | Reichelt: H25PR160 |
1 | Kunststoffgehäuse | | Halbschalengehäuse 123mm x 70mm x 30mm | Reichelt: SD 10 GR |
3 | Distanzhülse | | 15mm lang, Kunststoff | Reichelt: DK 15MM |
1 | Schraube M3 x 8mm | | für IC2 | |
1 | Mutter M3 | | für IC2 | |