Hauptmodul | ||||
Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
---|---|---|---|---|
1 | Widerstand 0-20Ω | R8 | Metall, abhängig vom verwendeten Display (Hinweise im Datenblatt beachten) | Reichelt: METALL x,xx |
1 | Widerstand 82Ω | R18 | Metall | Reichelt: METALL 82,0 |
1 | Widerstand 120Ω | R7 | Metall | Reichelt: METALL 120 |
1 | Widerstand 150Ω | R19 | Metall | Reichelt: METALL 150 |
3 | Widerstand 820Ω | R3, R4, R5 | Metall | Reichelt: METALL 820 |
1 | Widerstand 1kΩ | R9 | Metall | Reichelt: METALL 1,00K |
3 | Widerstand 4,7kΩ | R13, R14, R26 | Metall, R26 nur bei USB-Option | Reichelt: METALL 4,70K |
8 | Widerstand 10kΩ | R1, R2, R6, R17, R25, R27, R28, R29 | Metall, R27 nur bei USB-Option, R28/R29 nur bei Bluetooth-Option | Reichelt: METALL 10,0K |
1 | Widerstand 15kΩ | R12 | Metall | Reichelt: METALL 15,0K |
5 | Widerstand 22kΩ | R10, R16, R22-R24 | Metall | Reichelt: METALL 22,0K |
1 | Widerstand 27kΩ | R30 | Metall, nur bei Bluetooth-Option | Reichelt: METALL 27,0K |
1 | Widerstand 100kΩ | R15 | Metall | Reichelt: METALL 100K |
1 | Widerstand 7,5MΩ | R20 | Metall | Reichelt: METALL 7,50M |
1 | Widerstand 10MΩ | R21 | Metall | Reichelt: METALL 10,0M |
1 | Trimmpoti 5kΩ | R11 | Standard-Trimmer, liegend | Reichelt: PT 10-L 5,0K |
2 | Kondensator 22pF | C1, C2 | Keramik | Reichelt: KERKO 22P |
18 | Kondensator 100nF | C3-C13, C16-C18, C20, C28, C30, C31 | Keramik | Reichelt: KERKO 100N |
6 | Kondensator 1µF, 63V | C14, C21-C25 | Elektrolyt, radial | Reichelt: RAD 1/63 |
1 | Kondensator 4,7µF, 35V | C29 | Elektrolyt, radial | Reichelt: RAD 4,7/35 |
1 | Kondensator 47µF, 25V | C15 | Elektrolyt, radial | Reichelt: RAD 47/25 |
1 | Kondensator 470µF, 25V | C26 | Elektrolyt, radial | Reichelt: RAD 470/25 |
1 | Kondensator 470µF, 25V | C27 | Elektrolyt, radial, Low-ESR | Reichelt: RAD FC 470/25 |
1 | Trimmerkondensator 3..25pF | C19 | Trimmerkondensator | Reichelt: TRIMMER 11229 |
1 | Induktivität 330µH | L1 | Festinduktivität, 500mA | Reichelt: 09P 330µ |
1 | Quarz 11,0592MHz | Q1 | Bauform HC49/U-S | Reichelt: 11,0592-HC49U-S |
1 | Quarz 32768Hz | Q2 | Bauform TC38 oder TC26 | Reichelt: 0,032768 |
1 | LED 5mm Rot | D1 | LED 5mm ultrahell | Reichelt: LED 5-10500 RT |
1 | LED 5mm Gelb | D2 | LED 5mm ultrahell | Reichelt: LED 5-10500 GE |
1 | LED 5mm Blau | D3 | LED 5mm ultrahell | Reichelt: LED 5-12000 BL |
6 | Diode 1N4148 | D4, D6, D7, D10-D12 | D11 nur bei USB-Option, D12 nur bei Bluetooth-Option | Reichelt: 1N 4148 |
1 | Diode 1N4004 | D8 | Reichelt: 1N 4004 | |
1 | Fotodiode SFH203 | D5 | ohne Tageslichtfilter, nicht SFH203A | Reichelt: SFH 203 |
1 | Schottky-Diode 1N5819 | D9 | Reichelt: 1N 5819 | |
2 | Transistor IRFD110 | T1, T4 | T4 nur bei Bluetooth-Option | Reichelt: IRFD 110 |
1 | Transistor BC327-25 | T2 | Reichelt: BC 327-25 | |
1 | Transistor BC548C | T3 | Reichelt: BC 548C | |
1 | IC ATmega128-16AI | IC1 | oder ATmega128-16AU (TQFP) bzw. passendes Headerboard (auf den richtigen Quarz achten oder den Quarz austauschen) | Reichelt: ATMEGA 128-16 TQ W-R-E: labcard mit ATMEGA128-16AI/AU Siphec: ATm128-TB1.2 |
1 | LCD-Modul 240x128 Pixel | IC2 | Displaytech 128240A mit Controller T6963C (leider kaum noch erhältlich), bei Verwendung anderer Displays unbedingt die Anschlussbelegung beachten | Reichelt: LCD 240BL DIP Conrad: 181686 |
4 | IC 24C512 | IC3-IC6 | AT24C512 (DIP) oder M24512 (DIP) | Reichelt: ST 24C512 BN6 |
1 | IC LM358 | IC7 | DIP | Reichelt: LM 358 DIP |
1 | DCF77-Modul | IC8 | Pollin: 810054 Reichelt: DCF77 MODUL Conrad: 641138 ELV: 091610 | |
1 | IC PCF8583P | IC9 | DIP | Reichelt: PCF 8583 P |
1 | IC MAX232CPE | IC10 | DIP | Reichelt: MAX 232 CPE |
1 | IC LM2575-5.0 | IC11 | TO-22, kleiner Kühlkörper empfohlen | Reichelt: LM 2575 T5,0 |
1 | IC FT232RL | IC12 | nur bei USB-Option, bei Bedarf auf Adapterplatine, alternativ kann auch ein fertiges Modul verwenden werden | Reichelt: FT 232 RL Reichelt: RE 931EP (Adapterplatine) Elk-Tronic: SSOP 28 auf DIL 28 Watterott: SSOP - DIP Adapter 28-Pin Segor: SSOP28-DIP28/Platine ELV: 091859 (fertiges Modul) |
1 | Bluetooth-Modul | IC13 | Bluetooth-Modul mit IC BC417143B von csr | ebay: 115200bps Bluetooth Module Arduino |
6 | IC-Fassung 8-polig | IC3-IC7, IC9 | Reichelt: GS 8P | |
1 | IC-Fassung 16-polig | IC10 | Reichelt: GS 16P | |
1 | Anschlussklemme 4-polig | K1 | Raster 5,08mm | Reichelt: AKL 101-04 |
1 | Wannenstecker 6-polig | K2 | 2x3 Stifte, Raster 2,54mm | Reichelt: WSL 6G |
1 | Wannenstecker 10-polig | K3 | 2x5 Stifte, Raster 2,54mm (optional) | Reichelt: WSL 10G |
1 | D-Sub-Buchse 9-polig | K4 | für Printmontage (optional) | Reichelt: D-SUB BU 09EU |
1 | USB-B-Buchse | K5 | für Printmontage (optional), auch Mini- oder Micro-USB möglich | Reichelt: USB BW |
1 | Lautsprecher | LS1 | Sound-Transducer, für Printmontage | ELV: 006861 |
1 | Drehimpulsgeber mit Taster | S1 | beliebiger Geber mit 2 oder 4 Schritten pro Raster | Reichelt: STEC12E08 |
1 | Knopf für Drehimpulsgeber | S1 | passend zum verwendeten Drehimpulsgeber | Reichelt: KNOPF 10-150E |
2 | Taster | S2, S3 | beliebiger Taster für Printmontage | Reichelt: DT 6 SW |
1 | DIP-Schalter 2-fach | S4 | für Printmontage | Reichelt: NT 02 |
1 | Batterie | Bat1 | Knopfzelle CR2032 | Reichelt: CR 2032 |
1 | Batteriehalter | Bat1 | für Knopfzellen, Printmontage | Reichelt: KZH 20-1 |
1 | Steckernetzgerät 12V/0,5A | Schaltnetzteil geregelt | Reichelt: SNT 600 12V 2,5 | |
1 | Lochraster-Platine | 160mm x 100mm, Raster 2,54mm, Epoxyd | Reichelt: RE 200EP | |
1 | diverse Steckverbinder | für den Anschluss der Bedienelemente und des Displays an die Platine (nach Bedarf) | ||
1 | Gehäuse | OKW Comtec A0620107 oder A0620007 (bei flachem Aufbau) | Reichelt: OKW A0620 107 Reichelt: OKW A0620 007 | |
Alternative Bluetooth-Option | ||||
Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
1 | Widerstand 820Ω | R107 | Metall | Reichelt: METALL 820 |
1 | Widerstand 1kΩ | R105 | Metall | Reichelt: METALL 1,00K |
1 | Widerstand 2,2kΩ | R104 | Metall | Reichelt: METALL 2,20K |
3 | Widerstand 10kΩ | R101, R103, R106 | Metall | Reichelt: METALL 10,0K |
1 | Widerstand 27kΩ | R102 | Metall | Reichelt: METALL 27,0K |
2 | Kondensator 100nF | C101, C104 | Keramik | Reichelt: KERKO 100N |
2 | Kondensator 10µF, 35V | C102, C103 | Elektrolyt, radial | Reichelt: RAD 10/35 |
1 | Diode 1N4148 | D101 | Reichelt: 1N 4148 | |
2 | Schottky-Diode BAT43 | D102, D103 | Reichelt: BAT 43 | |
1 | LED 5mm Blau | D104 | LED 5mm ultrahell | Reichelt: ED 5-12000 BL |
1 | Transistor IRFD110 | T101 | Reichelt: IRFD 110 | |
1 | Transistor BC548C | T102 | Reichelt: BC 548C | |
1 | IC LM2937ET-3.3 | IC101 | TO-220 | Reichelt: LM 2937 ET3,3 |
1 | BlueNiceCom III Modul | IC102 | auch BlueNiceCom IV möglich, andere Beschaltung beachten | hbe-Shop: AMB2300 (BlueNiceCom IV) |
Spannungs-Inverter für LCD | ||||
Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
1 | Widerstand 1Ω | R201 | Metall | Reichelt: METALL 1,00 |
1 | Widerstand 1kΩ | R204 | Metall | Reichelt: METALL 1,00K |
1 | Widerstand 12kΩ | R202 | Metall | Reichelt: METALL 12,0K |
1 | Trimmpoti 500Ω | R203 | Standard-Trimmer, liegend | Reichelt: PT 10-L 500 |
1 | Kondensator 220pF | C203 | Keramik | Reichelt: KERKO 220P |
1 | Kondensator 100nF | C202 | Keramik | Reichelt: KERKO 100N |
2 | Kondensator 10µF, 35V | C201, C204 | Elektrolyt, radial | Reichelt: RAD 10/35 |
1 | Induktivität 330µH | L201 | Festinduktivität | Reichelt: SMCC 330µ |
1 | Diode 1N4148 | D201 | Reichelt: 1N 4148 | |
1 | IC TL497A | IC201 | DIL | Reichelt: TL 497A DIL |
Links zu den Händlerseiten
http://www.reichelt.de | Reichelt Elektronik |
http://www.conrad.de | Conrad Electronic |
http://www.pollin.de | Pollin Electronic |
http://www.segor.de | Segor Electronics |
http://www.chip45.com | Chip45 |
http://www.w-r-e.de | W-R-E (Wolfgang Rompel Elektronik) |
http://www.siphec.com | SIPHEC Development |
http://www.elv.de | ELV Elektronik |
http://www.elk-tronic.de | Elk Tronic |
http://www.watterott.com | Watterott electronic |
http://hbe-shop.de | hbe-Shop (Farnell-Händler) |
http://www.ebay.de | ebay |