Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
4 | Widerstand 1kΩ | R4-R7 | Metall | Reichelt: METALL 1,00K |
1 | Widerstand 1,8kΩ | R3 | Metall | Reichelt: METALL 1,80K |
4 | Widerstand 5,6kΩ | R8-R11 | Metall | Reichelt: METALL 5,60K |
1 | Widerstand 8,2kΩ | R1 | Metall | Reichelt: METALL 8,20K |
1 | Widerstand 15kΩ | R2 | Metall | Reichelt: METALL 15,0K |
2 | Kondensator 22pF | C1, C2 | Keramik, bei Verwendung eines ATtiny2313 | Reichelt: KERKO 22P |
2 | Kondensator 27pF | C1, C2 | Keramik, bei Verwendung eines AT90S2313 | Reichelt: KERKO 27P |
3 | Kondensator 100nF | C3, C5, C6 | Keramik | Reichelt: KERKO 100N |
2 | Kondensator 100µF | C4, C7 | Elektrolyt, radial | Reichelt: SM 100/16RAD |
1 | Quarz 4,0MHz | X1 | Bauform HC49/U-S | Reichelt: 4,0000-HC49U-S |
4 | Schottky-Diode SB550 | D1-D4 | | Reichelt: SB 550 |
1 | LED 3mm rot | LED1 | Low Current LED | Reichelt: LED 3MM 2MA RT |
2 | MOSFET BUZ11 | Tr1, Tr2 | mit Kühlkörper | Reichelt: BUZ 11 |
2 | MOSFET IRF5305 | Tr3, Tr4 | mit Kühlkörper | Reichelt: IRF 5305 |
4 | Transistor BC548B | Tr5-Tr8 | | Reichelt: BC 548B |
1 | IC AT90S2313 | IC1 | DIL, programmiert mit Fahrtregler-Software, kann durch ATtiny2313 ersetzt werden | Reichelt:
ATTINY 2313 DIP |
1 | L4940V5 | IC2 | TO-220 | Reichelt: L 4940 V5 |
1 | IC-Fassung 20-polig | (IC1) | | Reichelt: GS 20P |
1 | Buchsenleiste 5-polig | K1 | trennbare 20- oder 32-polige Leiste, Raster 2,54mm | Reichelt: SPL 20 |
1 | Stiftleiste 2x2 | JP1, JP2 | Raster 2,54mm | Reichelt: MPE 087-2-004 |
2 | Jumper | (JP1, JP2) | Raster 2,54mm | Reichelt: JUMPER 2,54GL SW |
1 | DIP-Schalter 3-polig | S1-S3 | | Reichelt: NT 03 |
1 | Schalter 1-polig | S4 | Kipp- oder Schiebeschalter | Reichelt: MS 243 |
1 | Platinenmaterial | | Lochraster 2,54mm, Größe 84mm x 61mm | Reichelt: HPR 160X100 |