Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
7 | Widerstand 330Ω | R1-R7 | Metall | Reichelt: METALL 330 |
1 | Widerstand 680Ω | R12 | Metall | Reichelt: METALL 680 |
1 | Widerstand 1kΩ | R8 | Metall | Reichelt: METALL 1,00K |
1 | Widerstand 2,7kΩ | R9 | Metall | Reichelt: METALL 2,70K |
2 | Widerstand 6,8kΩ | R17, R18 | Metall | Reichelt: METALL 6,80K |
1 | Widerstand 10kΩ | R16 | Metall | Reichelt: METALL 10,0K |
2 | Widerstand 15kΩ | R11, R14 | Metall | Reichelt: METALL 15,0K |
1 | Widerstand 39kΩ | R10 | Metall | Reichelt: METALL 39,0K |
1 | Widerstand 270kΩ | R13 | Metall | Reichelt: METALL 270K |
1 | Trimmpoti 5kΩ | R15 | Standard-Trimmer, liegend | Reichelt: PT 10-L 5,0K |
2 | Kondensator 82pF | C1, C2 | Keramik | Reichelt: KERKO 82P |
1 | Kondensator 100nF | C4 | Keramik | Reichelt: KERKO 100N |
1 | Kondensator 100µF, 16V | C3 | Elektrolyt, radial | Reichelt: SM 100/16RAD |
1 | IC PIC 16F84A | IC1 | DIL, programmiert mit Zahnputzuhr-Software | Reichelt: PIC 16F84A-04P |
2 | Transistor BC548B | Tr2, Tr3 | | Reichelt: BC 548B |
3 | Transistor BC328-25 | Tr1, Tr4, Tr5 | | Reichelt: BC 328-25 |
1 | Diode 1N4001 | D1 | | Reichelt: 1N 4001 |
2 | Diode 1N4148 | D2, D3 | | Reichelt: 1N 4148 |
6 | LED 5mm rot | LED1-LED6 | Standard-LED 5mm | Reichelt: LED 5MM RT |
1 | 7-Segment-LED | LED7 | HA1141 oder ähnlich, gemeinsame Anode | Reichelt: SA 52-11 RT |
1 | Quarz 32768Hz | X1 | Bauform TC38 oder TC26 | Reichelt: 0,032768 |
1 | IC-Fassung 18-polig | (IC1) | | Reichelt: GS 18P |
1 | Taster | T1 | beliebiger Taster für Printmontage | Reichelt: DIT 1 WS |
1 | Piezo-Schallwandler | LS1 | 3 Anschlüsse, nicht mehr erhältlich; kann durch Piezosummer ersetzt werden, dabei entfallen die Bauteile R12-R14 und Tr3 |
Reichelt: SUMMER CPM 121 |
4 | Batterie 1,5V AAA | Bt1-Bt4 | | Reichelt: GPR AL 4XAAA |
1 | Platinenmaterial | | Lochraster 2,54mm, Größe 65mm x 55mm | Reichelt: H25PR075 |
1 | Gehäuse | | Kunststoffgehäuse 103mm x 62mm x 26mm | Reichelt: SP 2000 SW |