Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
---|---|---|---|---|
1 | Widerstand 270Ω | R7 | Metall | Reichelt: METALL 270 |
27 | Widerstand 680Ω | R10-R22, R24-R37 | Metall | Reichelt: METALL 680 |
3 | Widerstand 750Ω | R9, R23, R38 | Metall | Reichelt: METALL 750 |
2 | Widerstand 1kΩ | R3, R8 | Metall | Reichelt: METALL 1,00K |
1 | Widerstand 3kΩ | R6 | Metall | Reichelt: METALL 3,00K |
1 | Widerstand 10kΩ | R5 | Metall | Reichelt: METALL 10,0K |
1 | Widerstand 33kΩ | R1 | Metall | Reichelt: METALL 33,0K |
1 | Trimmpoti 1MΩ | R4 | Standard-Trimmer, liegend | Reichelt: PT 10-L 1,0M |
1 | Fotowiderstand LDR 05 | R2 | Reichelt: LDR 05 | |
1 | Kondensator 27pF | C2 | Keramik | Reichelt: KERKO 27P |
1 | Kondensator 33pF | C1 | Keramik | Reichelt: KERKO 33P |
2 | Kondensator 100pF | C12, C13 | Keramik, optional, siehe Text | Reichelt: KERKO 100P |
5 | Kondensator 100nF | C3, C6, C7, C10, C11 | Keramik | Reichelt: KERKO 100N |
1 | Kondensator 2,2µF, 50V | C4 | Elektrolyt, radial | Reichelt: SM 2,2/50RAD |
1 | Kondensator 10µF, 16V | C8 | Elektrolyt, radial | Reichelt: SM 10/16RAD |
1 | Kondensator 47µF, 25V | C9 | Elektrolyt, radial | Reichelt: RAD 47/25 |
1 | Kondensator 1000µF, 25V | C5 | Elektrolyt, axial | Reichelt: AX 1.000/25 |
1 | Quarz 4,0MHz | X1 | Bauform HC49/U-S | Reichelt: 4,0000-HC49U-S |
1 | Diode 1N4001 | D1 | Reichelt: 1N 4001 | |
4 | LED SA23-12 SRWA | D2-D5 | Reichelt: SA 23-12 RT | |
2 | Z-Diode 4,7V | D6, D7 | Reichelt: ZF 4,7 | |
1 | Transistor BC548B | Tr1 | Reichelt: BC 548B | |
1 | IC AT90S4434 | IC1 | DIL, programmiert mit Wohraumuhr-Software, kann durch AT90S8535 oder ATmega8535 ersetzt werden | Reichelt: ATMEGA 8535-16D |
1 | IC DS1620 | IC2 | DIL | Reichelt: DS 1620 |
1 | IC 7805 | IC3 | TO-220 | Reichelt: µA 7805 |
1 | IC LM317 | IC4 | TO-220, kleiner Kühlkörper empfohlen | Reichelt: LM 317-220 |
1 | DCF77-Modul | Emp1 | offener Kollektorausgang | Conrad: 641138 ELV: 091610 |
1 | IC-Fassung 40-polig | (IC1) | Reichelt: GS 40P | |
1 | IC-Fassung 8-polig | (IC2) | Reichelt: GS 8P | |
1 | Hohlstecker-Buchse | K1 | Printmontage, 2,1mm | Reichelt: HEBW 21 Reichelt: LUM NEB 21R |
1 | Buchsenleiste 5-polig | K2 | trennbare 20- oder 32-polige Leiste, Raster 2,54mm | Reichelt: SPL 20 |
1 | Stiftleiste 2x3-polig | JP1 | Stiftleiste 2-reihig, Raster 2,54mm | Reichelt: SL 2X10G 2,54 (kürzen) |
3 | Jumper | (JP1) | Raster 2,54mm | Reichelt: JUMPER 2,54GL SW |
1 | Taster | T1 | beliebiger Taster für Printmontage | Reichelt: DIT 1 WS |
1 | Steckernetzgerät 12V/0,2A | Schaltnetzteil geregelt | Reichelt: SNT 600 12V | |
1 | Platinenmaterial | Lochraster 2,54mm, Größe 255mm x 125mm, 3 Teile (160mm x 100mm) passend schneiden und auf Rahmen setzen | Reichelt: HPR 160X100 |
Links zu den Händlerseiten
http://www.reichelt.de | Reichelt Elektronik |
http://www.conrad.de | Conrad Electronic |
http://www.elv.de | ELV Elektronik |