Hauptmodul mit allen Optionen | ||||
---|---|---|---|---|
Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
2 | Widerstand 1,2Ω | R7, R8 | Metall | Reichelt: METALL 1,20 |
2 | Widerstand 27Ω | R24, R25 | Metall | Reichelt: METALL 27,0 |
1 | Widerstand 82Ω | R18 | Metall | Reichelt: METALL 82,0 |
1 | Widerstand 120Ω | R6 | Metall | Reichelt: METALL 120 |
1 | Widerstand 150Ω | R19 | Metall | Reichelt: METALL 150 |
3 | Widerstand 270Ω | R3, R4, R38 | Metall | Reichelt: METALL 270 |
1 | Widerstand 470Ω | R29 | Metall | Reichelt: METALL 470 |
3 | Widerstand 1kΩ | R2, R9, R36 | Metall | Reichelt: METALL 1,00K |
1 | Widerstand 1,5kΩ | R26 | Metall | Reichelt: METALL 1,50K |
1 | Widerstand 2,2kΩ | R35 | Metall | Reichelt: METALL 2,20K |
3 | Widerstand 4,7kΩ | R1, R13, R14 | Metall | Reichelt: METALL 4,70K |
7 | Widerstand 10kΩ | R5, R17, R27, R30, R32, R34, R37 | Metall | Reichelt: METALL 10,0K |
2 | Widerstand 15kΩ | R12, R28 | Metall | Reichelt: METALL 15,0K |
5 | Widerstand 22kΩ | R10, R16, R22, R23, R31 | Metall | Reichelt: METALL 22,0K |
1 | Widerstand 27kΩ | R33 | Metall | Reichelt: METALL 27,0K |
1 | Widerstand 100kΩ | R15 | Metall | Reichelt: METALL 100K |
1 | Widerstand 1MΩ | R21 | Metall | Reichelt: METALL 1,00M |
1 | Widerstand 7,5MΩ | R20 | Metall | Reichelt: METALL 7,50M |
1 | Trimmpoti 5kΩ | R11 | Standard-Trimmer, liegend | Reichelt: PT 10-L 5,0K |
2 | Kondensator 22pF | C1, C2 | Keramik | Reichelt: KERKO 22P |
2 | Kondensator 27pF | C29, C30 | Keramik | Reichelt: KERKO 27P |
1 | Kondensator 33nF | C27 | Keramik | Reichelt: Z5U-2,5 33N |
18 | Kondensator 100nF | C3-C11, C14-C16, C18, C24, C25, C28, C33, C36 | Keramik | Reichelt: KERKO 100N |
6 | Kondensator 1µF, 63V | C12, C19-C23 | Elektrolyt, radial | Reichelt: RAD 1/63 |
3 | Kondensator 10µF, 35V | C26, C34, C35 | Elektrolyt, radial | Reichelt: RAD 10/35 |
1 | Kondensator 47µF, 25V | C13 | Elektrolyt, radial | Reichelt: RAD 47/25 |
1 | Kondensator 470µF, 25V | C31 | Elektrolyt, radial | Reichelt: RAD 470/25 |
1 | Kondensator 470µF, 25V | C32 | Elektrolyt, radial, Low-ESR | Reichelt: RAD FC 470/25 |
1 | Trimmerkondensator 3..25pF | C17 | Trimmerkondensator | Reichelt: TRIMMER 11229 |
1 | Induktivität 330µH | L1 | Festinduktivität, 500mA | Reichelt: 09P 330µ |
1 | Quarz 32768Hz | Q2 | Bauform TC38 oder TC26 | Reichelt: 0,032768 |
1 | Quarz 6,0MHz | Q3 | Bauform HC49/U-S | Reichelt: 6,0000-HC49U-S |
1 | Quarz 11,0592MHz | Q1 | Bauform HC49/U-S | Reichelt: 11,0592-HC49U-S |
1 | LED 5mm Rot | D1 | LED 5mm ultrahell | Reichelt: LED 5-4500 RT |
1 | LED 5mm Gelb | D2 | LED 5mm ultrahell | Reichelt: LED 5-1000 GE |
1 | LED 5mm Blau | D14 | LED 5mm ultrahell | Reichelt: LED 5-2200 BL |
6 | Diode 1N4148 | D3, D5-D8, D11 | Reichelt: 1N 4148 | |
1 | Diode 1N4004 | D9 | Reichelt: 1N 4004 | |
1 | Schottky-Diode 1N5819 | D10 | Reichelt: 1N 5819 | |
2 | Schottky-Diode BAT43 | D12, D13 | Reichelt: BAT 43 | |
1 | Fotodiode SFH203 | D4 | ohne Tageslichtfilter, nicht SFH203A | Reichelt: SFH 203 |
1 | Transistor BC327-25 | T2 | Reichelt: BC 327-25 | |
2 | Transistor BC548C | T3, T5 | Reichelt: BC 548C | |
1 | Transistor IRFD110 | T4 | Reichelt: IRFD 110 | |
1 | Transistor IRL540N | T1 | Reichelt: IRL 540N | |
1 | IC ATmega128-16AI | IC1 | oder ATmega128-16AU (TQFP) bzw. passendes Headerboard (auf den richtigen Quarz achten oder den Quarz austauschen) | Reichelt: ATMEGA 128-16 TQ W-R-E: labcard mit ATMEGA128-16AI/AU Siphec: ATm128-TB1.2 |
1 | LCD-Modul 240x128 Pixel | IC2 | Displaytech 128240A mit Controller T6963C (leider kaum noch erhältlich), bei Verwendung anderer Displays unbedingt die Anschlussbelegung beachten | Reichelt: LCD 240BL DIP Conrad: 181686 |
2 | IC 24C512 | IC3, IC4 | AT24C512 (DIP) oder M24512 (DIP) | Reichelt: ST 24C512 BN6 |
1 | IC LM358 | IC5 | DIP | Reichelt: LM 358 DIP |
1 | DCF77-Modul | IC6 | Modul mit offenem Kollektorausgang | Conrad: 641138 ELV: 091610 |
1 | IC PCF8583P | IC7 | DIP | Reichelt: PCF 8583 P |
1 | IC MAX232CPE | IC8 | DIP | Reichelt: MAX 232 CPE |
1 | IC FT232BM | IC9 | nicht mehr erhältlich, Ersatz durch FT232RL möglich (Schaltungsänderung erforderlich) | Reichelt: FT 232 RL |
1 | IC LM2575-5.0 | IC10 | TO-22, kleiner Kühlkörper empfohlen | Reichelt: LM 2575 T5,0 |
1 | IC LM2937ET-3.3 | IC11 | TO-220 | Reichelt: LM 2937 ET3,3 |
1 | Bluetooth-Modul | IC12 | Bluetooth-Modul „BlueNiceCom III“, nicht mehr erhältlich | |
4 | IC-Fassung 8-polig | (IC3-IC5, IC7) | Reichelt: GS 8P | |
1 | IC-Fassung 16-polig | (IC8) | Reichelt: GS 16P | |
1 | Buchsenleiste 22-polig | (IC2) | Raster 2,54mm, passend kürzen | Reichelt: SPL 32 |
1 | Stiftleiste 22-polig | (IC2) | Raster 2,54mm, Höhe 8,5mm, passend kürzen | Reichelt: BL 1X10G8 2,54 und Reichelt: BL 1X20G8 2,54 |
1 | Stiftleiste 22-polig | (IC2) | Raster 2,54mm, passend kürzen | Reichelt: SL 1X36G 2,54 |
1 | Anschlussklemme 4-polig | K1 | Raster 5,08mm | Reichelt: AKL 101-04 |
1 | D-Sub-Buchse 9-polig | K2 | gewinkelt, für Printmontage | Reichelt: D-SUB BU 09EU |
1 | USB-B-Buchse | K3 | für Printmontage, auch Mini- oder Micro-USB möglich | Reichelt: USB BW |
1 | Buchsenleiste 5-polig | K4 | Raster 2,54mm, passend kürzen | Reichelt: SPL 20 |
1 | Wannenstecker 10-polig | K5 | 2x5 Stifte, Raster 2,54mm (optional) | Reichelt: WSL 10G |
1 | Lautsprecher | LS1 | Sound-Transducer, für Printmontage | ELV: 006861 |
1 | Drehimpulsgeber | S1 | mit Taster | Segor: EVQWTA-S20-15B |
1 | Drehknopf für 6mm-Achse | S1 | passend zum verwendeten Drehimpulsgeber | Reichelt: KNOPF 12-6 AL |
1 | Taster | S2 | beliebiger Taster für Printmontage | Reichelt: DT 6 GR |
1 | Taster | S3 | horizontal, Printmontage | Reichelt: TASTER 3305D |
1 | Batterie 3V | Bat1 | Knopfzelle CR2032 | Reichelt: CR 2032 |
1 | Batteriehalter | Bat1 | für Knopfzellen, Printmontage | Reichelt: KZH 20-1 |
1 | Platinenmaterial | Lochraster 2,54mm, 180mm x 120mm und 85mm x 8mm | ||
1 | Kunststoff-Gehäuse | TEKO TK11, 188mm x 134mm x 40mm | Reichelt: TEKO TK11 | |
14 | Schraube M3 x 6mm | für Display und Taster/LED-Platine | ||
3 | Schraube M3 x 8mm | für D-Sub-Buchse und Spannungsregler | ||
3 | Mutter M3 | für D-Sub-Buchse und Spannungsregler | ||
7 | Distanzhülse M3 | 15mm lang, mit beidseitigem Innengewinde (Display, Taster/LED) | ||
17 | Unterlegscheibe M3 | Metall, für Display und Taster/LED-Platine | ||
4 | Unterlegscheibe M3 | Plastik, für Display | ||
1 | Steckernetzgerät 12V/0,2A | Schaltnetzteil geregelt | Reichelt: SNT 600 12V | |
Spannungs-Inverter für LCD | ||||
Anzahl | Bauteil | Nummer | Bemerkung | Empfehlung |
1 | Widerstand 1Ω | R101 | Metall | Reichelt: METALL 1,00 |
1 | Widerstand 1kΩ | R104 | Metall | Reichelt: METALL 1,00K |
1 | Widerstand 12kΩ | R102 | Metall | Reichelt: METALL 12,0K |
1 | Trimmpoti 500Ω | R103 | Standard-Trimmer, liegend | Reichelt: PT 10-L 500 |
1 | Kondensator 470pF | C103 | Keramik | Reichelt: KERKO 470P |
1 | Kondensator 100nF | C102 | Keramik | Reichelt: KERKO 100N |
1 | Kondensator 22µF, 25V | C104 | Elektrolyt, radial | Reichelt: RAD 22/35 |
1 | Kondensator 100µF, 10V | C101 | Elektrolyt, radial | Reichelt: RAD 100/25 |
1 | Induktivität 330µH | L101 | Festinduktivität | Reichelt: SMCC 330µ |
1 | Diode 1N4148 | D101 | Reichelt: 1N 4148 | |
1 | IC TL497A | IC101 | DIL | Reichelt: TL 497A DIL |
Links zu den Händlerseiten
http://www.reichelt.de | Reichelt Elektronik |
http://www.conrad.de | Conrad Electronic |
http://www.segor.de | Segor Electronics |
http://www.w-r-e.de | W-R-E (Wolfgang Rompel Elektronik) |
http://www.siphec.com | SIPHEC Development |
http://www.elv.de | ELV Elektronik |